1. This is a LED curing reflow equipment for which lamps are used as the heat resource.
2. Off-line을 in-line하여 작성효율및 생산성 효율을 높였습니다.
3. Easy to manage the temperatures and production quantities by using high-level communication interface
4. Saving of the production unit cost is realized as the system consumes minimum quantity of nitrogen thanks to the efficient pressure control for the supply of nitrogen
5. No secondary pollution as the system is designed in a way that out-gas can be discharged smoothly
6. The hardening process take places more stably and swiftly compared with the hot air blowing method.
Relation Images
LED NIR Curing Step Mode
What is NIR? The drying efficiency is multiple times or decades of times higher compared with the thermal drying method.
TEMPERATURE STEP MODE
1. Recording of the inner temperatures (Recorder) - Paper type
2. Recording of the inner temperatures (Recorder) - Paperless (Digital) type
3. Auto load-unload (Conveyor type)
4. RS232 and Ethernet for communication function
5. N2 purge function
6. HEPA filters are installed
| Model | LRO-DP-M9 | LRO-DP-M12 |
|---|---|---|
| Power | 220V 3PH or 380V 3PH | |
| TempeRange | Max 220°C | |
| Tempe Rising Time(min) | ambient~170°C within 15min(Onleadframe) | |
| Uniformity(°C) | ±5.0°C(Onleadframe) | |
|
Dimension (WxDxH/mm) |
(Ext.)W1200*L3800*H1650 | (Ext.)W1700*L3200*H1650 |
| Capacity(Magazine/hr) | max:9ea(magazine)/hr | max:12ea(magazine)/hr |
| Control | Touch Screen 7”,PLC,PID control,SCR control | |
| Cooling Performance |
cooling air(170→70°C within 10min) cooling refrigerant : air & N2 |
|
| Safety Device |
Temp over cut,motor over current cut, conveyer motor over load Set point temp range alarm |
|
| Heating Zone | 7zone(Individually controlled) | |
| Conveyer System | Progress step by step(speed control function) | |
| N2 Purge(option) | regulator,gage,flow meter,filter | |
| Communication function(option) | RS232C or Ethernet,Saving of the information of individual products | |