Run-In Cycle Chamber
1. This equipment is to evaluate the durability and defectiveness of products by increasing and decreasing the temperature rapidly (6°C/min) for the parts of automobiles
2. Designed and manufactured in a way that the test results can be managed through a computer system, making it easy to check the results later after the test.
3. Designed to reach the inner temperature of a product quickly, making it possible to reduce the defects when shipped by testing the whole quantity of the shipment.
Run-in inside / Run-in chilling unit
Model | DYRI-1000P | DYRI-2000P |
---|---|---|
Temperature Range | -65°C~+180°C | |
Dimension | W1000*D1000*H1000mm | W1500*D1500*H1500mm |
Ambient | 20±8°C / 50±20% | |
Sample Temperature Uniformity |
at -55°C within ±1.0°C, at 150°C within ±1.5°C(Sample internal temperature) | |
Up/Down Rate | within 6°C/min | |
Exterior & Interior | Exterior:SS41 Coating / Interior:SUS304 | |
Insulation | Glass Wool | |
Refrigerator System |
Double Stage/Cascade & by-Pass Methods Semi-sealed type compressor |
|
Cooled type | Air cooled/Water cooled type | |
Water Supply | Auto water supply system | |
Safety |
Motor & Compressor over current protector,Compressor pressure,Over Heating protector Dry/Wet heater protector,water level sensor,heater fuse |